Support
Machine type
Brand
DTF Station Aries 213 and Aries 113 UV DTF printers

DTF Station Pilot in the wrong language or not connecting: set the port and language (Prestige and Aries)

✓ Reviewed by Jason KimUpdated 2 min readFits: DTF Station Pilot · Prestige L2 · XL2 · XL2 Pro · XL3 · XL4 · R1 · R2 Pro · Aries 113 · Aries 213 · Aries 124
Short answer

If Pilot shows another language or a blinking red symbol in the bottom left corner, it has lost its connection setting. Open the last main tab, then its last subtab, click the first icon, pick your Ethernet port from the list and save until the light turns solid green. In the same tab, the second button sets the language: choose English, confirm, and restart Pilot.

When to use this

Use this when DTF Station Pilot opens with menus in another language or unreadable characters, or when the connection symbol in the bottom left corner is blinking red and the printer isn't responding. Both usually mean Pilot has lost its port setting, which often happens after a Windows update, a new cable or adapter, or a reinstall. The fix takes a couple of minutes and doesn't change any of your print settings or calibration.

Check the basics first: the printer is on and showing Idle, and the Ethernet cable runs straight from the printer to the computer with no router or switch in between.

Reconnect the printer

  1. Open the connection settings

    Click the last main tab on the right side of Pilot, then the last subtab inside it. Click the first icon: it's the only active option for the printer connection.

  2. Pick the Ethernet port

    Open the drop-down and choose the Ethernet port the printer is plugged into. It shows as an address such as 192.168.127.58. The last digits vary from computer to computer, but the printer's own address always ends in .10, so don't pick that one for the computer.

  3. Save

    Click the button on the left side to save, click OK and close the pop-up. Wait for the indicator to turn solid green. That means Pilot is talking to the printer.

Change the language to English

  1. Open the language setting

    In the same tab, click the second button from the top and open the language drop-down.

  2. Select English and confirm

    Choose English, press the button on the right side and click OK.

  3. Restart Pilot

    Close Pilot completely and open it again. Everything should now be in English.

If it still won't connect

  • No port shows in the list, or it stays red: try a different Ethernet cable, and on a laptop a different USB-to-Ethernet adapter.
  • The computer's network adapter needs a fixed address in the same range as the printer, never ending in 10. Our Prestige XL setup guide covers that setting, and we can set it with you remotely.
  • Antivirus or Windows Firewall can block Pilot. Allow it as a trusted program.
  • On printers built before December 2024, a "failed to load parameters" message means the printer needs updated firmware files first. Text us your serial number.
  • The language won't change after a restart: contact us.

Text us a photo or short video at (562) 609-4996. A screenshot of Pilot helps.

Watch DTF Station set the port and language in Pilot

Embedded from the manufacturer's official channel.

Common questions

Why did Pilot switch to Chinese?

Pilot can lose its saved settings after an update, a reinstall or a connection change. Set the language back to English in the last main tab, second button, then restart Pilot.

Which port should I choose?

The Ethernet port the printer cable is plugged into. It looks like 192.168.127.xx. The printer itself uses an address ending in .10, so the computer's address must end in something else.

The symbol in the corner is still red after I saved. What now?

Try another cable and, on a laptop, another Ethernet adapter. Make sure there's no router or switch in between. If it stays red, the computer's adapter address needs setting, and we can do that with you remotely.

Do I need to do this every day?

No. Once it's saved it should stay. If it keeps resetting, tell us, along with any recent Windows or antivirus changes.

Sources
Did this fix it?