Support
Machine type
Brand
DTF Station Aries 213 and Aries 113 UV DTF printers

Prestige and Aries encoder strip: when to clean it, how to inspect it and how to clean it safely

✓ Reviewed by Jason KimUpdated 2 min readFits: Prestige R1 · R2 · R2 Pro · L2 · XL2 · XL2 Pro · XL3 · XL4 · Aries 113 · 213 · 124
Short answer

Open the cover and look along the clear encoder strip behind the carriage. If it's scratched, dented or bent it needs replacing. If it's only dirty, pinch it in a lint-free cloth dampened with high-purity isopropyl alcohol and wipe side to side along its whole length, moving the carriage to reach the hidden section. Reseat it centered in its brackets, then press Enter so the carriage returns home. Clean it weekly.

The encoder strip is the clear, tape-like strip that runs across the printer behind the carriage. A sensor on the carriage reads it to know exactly where the heads are. When ink mist or dust builds up on it, the printer loses track of position: prints turn blurry or doubled, or the carriage stops. Cleaning it is part of weekly maintenance on Prestige and Aries printers, and the procedure is the same on every model.

Symptom Encoder strip involved?
Blurry or slightly doubled prints Often. Clean it first
Pilot shows error 016004 Possibly. This code points to the encoder strip, encoder sensor or carriage board
Carriage stops or doesn't move properly One of several causes

Inspect it first

Open the printer cover and find the strip running horizontally along the metal bracket behind the carriage. Look along its full length with a light. If it is scratched, dented, creased or bent, don't clean it: it needs replacing. Text us a photo and we'll confirm the right strip for your model. If it's only dirty or inky, carry on.

Clean it

You need a lint-free cloth and high-purity isopropyl alcohol (DTF Station uses 99.9%).

  1. Dampen the cloth

    Wet the lint-free cloth with isopropyl alcohol. Damp, not dripping.

  2. Pinch and wipe

    With one hand, lift the strip gently away from the bracket. Pinch it between the folds of the damp cloth and wipe side to side. Use light pressure; the strip is thin and creases easily.

  3. Work along the length

    Clean section by section from the left through the center, until everything you can reach is clean.

  4. Reach the hidden part

    The carriage covers part of the strip. Move the carriage to uncover it and clean that section to the very end. On the R2, R2 Pro and XL series, with the printer on, press the left arrow once to release the carriage from its dock and hold the left arrow to move it, then wait for it to stop before you reach in. Not sure how on your model? Text us.

  5. Reseat it

    Wherever the strip passes through a support bracket, make sure it sits in the center of the bracket, flat and untwisted.

  6. Park the carriage

    Press Enter on the control panel and let the carriage return to its home position on its own.

A strip left twisted or out of its brackets can damage the strip or the carriage motor. Check every bracket before you print.

Then test

Print a test image with fine text. If it's still blurry after a clean, the cause may be calibration, the carriage belt or the encoder sensor. On XL series printers, see our blurry and misaligned prints guide; on the R2 and R2 Pro, see carriage problems.

Error 016004 still showing, or the strip looks damaged? Text us a photo or short video at (562) 609-4996.

Watch DTF Station inspect and clean an encoder strip

Embedded from the manufacturer's official channel.

Common questions

How often should I clean the encoder strip?

Weekly, as part of regular maintenance, and any time prints turn blurry.

What do I clean it with?

A lint-free cloth dampened with high-purity isopropyl alcohol. DTF Station uses 99.9%.

Can a dirty encoder strip cause blurry prints?

Yes. Ink or dust on the strip throws off the carriage's position reading, which shows up as blurry or doubled prints.

What does error 016004 mean?

DTF Station links it to the encoder strip, the encoder sensor or the carriage board. Clean the strip first, then contact us if the error remains.

When does the strip need replacing?

When it has scratches, dents, creases or bends. Cleaning won't fix physical damage.

Did this fix it?