How can we help?

Setup guides, maintenance, fixes and manuals for the machines we sell, written and checked by our own tech team.

Support
Machine type
Brand

Pick your machine

Setup, maintenance, fixes, error messages and manuals in one place.

Heat presses

Hotronix Fusion IQ, Air Fusion IQ and Dual Air Fusion IQFusion IQ · Air Fusion IQ · Dual Air Fusion IQ Geo Knight DK20S and DK20SP Digital Knight Swing-Away PressesDK20S · DK20SP · other Digital Knight presses (shared controller help) DTF Station Maxima and Proxima Dual Heat PressesMaxima Auto Dual · Maxima Semi-Auto Dual · Proxima Auto Dual (TQB-4050) · Proxima Semi-Auto Dual (TQ-4050) · Proxima Dual (TY4050) Hotronix Auto Open Clam and Hover Heat PressAuto Open Clam 16x20 · 16x16 · 11x15 · Hover Press 16x20 DTF Station Prisma Auto Heat PressPrisma Auto · AA Prisma Auto (earlier units) DTF Station Prisma Dual Heat PressPrisma Dual (110 V and 220 V) DTF Station Prisma Swing Heat PressPrisma Swing 16 x 20 (GS-303) Insta 718, 728 and 828 Automatic Swing-Away Heat PressesInsta 718 · 728 · 828 (718S and 728S) DTF Station Prisma Sentry Heat PressPrisma Sentry 16 x 20 Geo Knight DC16 and DC16AP Digital Combo Swing-Away PressesDC16 · DC16AP (controller and attachments) Geo Knight DK Digital Clamshell Presses: DK20, DK16, DKA Auto, DK8 Label and DK7 CapDK20 · DK16 · DKA Auto Clamshell (DK20A, DK16A) · DK8 · DK8T · DK7 · DK7T Hotronix Auto Open Cap Press and 360 IQ Hat PressAuto Open Cap Press (STXC) · 360 IQ Hat Press (STXCP) Hotronix Craft Heat Press 9 x 12Craft Press 9 x 12 (CP912-120, EASY Brand) Hotronix Mighty Mug Heat PressMighty Mug (Mighty Press digital mug press) · 120 V and 240 V Insta 256 and 288 Manual Swing-Away Heat PressesInsta 256 (256-S 120 V, 256-N 230 V) · 288 (230 V) Insta 907 Dual Station Shuttle Label Heat PressInsta 907 · 907S

Latest guides

xTool Apparel Printer and OS1 transfers peeling, cracking or creased: heat press settings and technique

For xTool PET film on 100% cotton, xTool recommends 160°C (320°F) for 6 seconds, peeling only after the...

xTool OS1 setup: mounting the Apparel Printer, adding powder, preheating and alignment calibration

Lock the OS1's four foot cups, lift the printer on with two people, screw them together, add powder...

xTool OS1 powder not curing: powdery, patchy, yellow or oily transfers and how to fix them

If transfers come out of the OS1 powdery, check the curing temperature (xTool recommends 110°C, 230°F), preheat until...

xTool OS1 errors: Misalignment, printer not recognizing the oven, and oven won't power on

For a Misalignment error, trim and realign the film, brush the film detection sensor, restart both machines and...

xTool OS1 cleaning: sensors, waste-powder bin, inspection window and dirty powder

Brush the OS1's film detection sensor every day before printing, clean the shaking motion sensor and delivery slot...

xTool MetalFab status light, laser won't fire, black smoke, sticking wire and porous welds

The MetalFab only fires when the interlock key loop is closed, lasering is enabled and the grip sensing...

xTool MetalFab setup checklist: power circuit, shielding gas, regulator, fittings, workspace and safety gear

Before the MetalFab arrives, have an electrician confirm a dedicated circuit (xTool recommends 220 V, 25 A or...

xTool MetalFab weld settings: filler wire or not, wire by metal, wire feeder, scan width and thickness limits

On the MetalFab, skip filler wire for sheet under 1 mm or small gaps and weld autogenously; otherwise...

Can't find it?

Text a photo or short video of the problem to our tech team, or call a branch.